Spray painting interior trim, doors, built-ins, wainscoting, beams, coffered ceilings, and custom millwork to afactory-smooth finish. The most technical and highest-precision painting work in any custom home — done by a painter who has been doing this at the highest level for over 20 years.
Your estimate is handled directly by Sameh and Pam – no call centre, no pushy sales, just clear information.
01 · Interior Painting Specialist
Fine Finish Painting Is Not What Most Painters Do
Any painter can roll walls. Very few can spray interior trim, built-ins, and custom millwork to a factory-smooth finish without drips, runs, orange peel texture or visible brush marks. This work requires the right spray equipment, the right products, the right prep, and — most importantly — the right hands. Sameh has been doing this level of work for over20 years, including five years in Paris on luxury residences where fine finishing was the only acceptable standard. If your home has custom millwork, built-ins, statement trim or coffered ceilings — this is the work we are built for.
FACTORY-SMOOTH SPRAY FINISH
No Brush Marks. No Texture.No Runs.
We spray interior trim, doors and millwork to a factory-smooth finish —the same clean, consistent look yousee on new cabinetry. Achieved through correct prep, the right product, proper equipment and 20+ years of spray application experience.
EUROPEAN PRECISION
Trained on Luxury Finishing in Paris
Sameh spent five years in Paris applying fine finishes on luxury residences and heritage buildings.That level of precision and patience is what separates Blue Nile's millwork finishing from every other Edmonton painter.
RIGHT PRODUCT FOR EVERY SURFACE
Oil, Waterborne, Lacquer &Hybrid Systems
We select the right coating system for every millwork surface — oil primer for adhesion, waterborne for low-odour, lacquer for cabinetry, hybrid systems for doors. The right product is the difference between a finish that lasts and one that fails.
02 · What We Spray Finish
Fine Finish Painting Services for Edmonton Custom Homes
From interior doors and trim to custom built-ins, coffered ceilings and statement beams — we handle the full scope of millwork and fine finish painting in Edmonton luxury homes and high-end renovations.
A focused, owner-led painting company built for custom homes, high-end repaints and demanding projects.
City Licensed · Fully Insured · WCB Covered
We are a City of Edmonton licensed painting contractor, fully insured and WCB covered for residential and commercial work.
Serving Edmonton Since 2010
Trusted by homeowners and builders across Edmonton for over a decade, with long-term local experience.
European Experience (Paris)
Five years of professional painting experience in Paris before establishing operations in Edmonton.
Owner-Led Projects
Every project is overseen by Sameh and Pam — no random subcontractors, no shortcuts.
Premium Preparation & Clean Worksites
Detailed surface prep, sharp finishes, full protection, and respectful, clean crews.
Written Workmanship Warranty
All painting work is backed by a written workmanship warranty for peace of mind.
06 · How We Work
Simple, Organized Process for Larger Projects
We’re set up for custom homes, high-end repaints and commercial work – with clear roles: Sameh oversees the project, Pam manages communication and colours, and the crew focuses on the finish.
01.
Initial call & project details
Pam takes your call or message, gathers basic details about your home or building, timelines and any deadlines.
02.
On-site walkthrough
Sameh and/or Pam walk the home or commercial space and note scope, access, protection and colour ideas.
03.
Detailed written estimate
You receive a clear proposal listing rooms, surfaces, products and pricing – suitable for 3,000–10,000+ sq. ft. homes and multi-unit projects.
04.
Scheduling & colour support
Pam confirms dates, coordinates with your builder or designer, and helps finalize colours before we start.
05.
Protection, prep & painting
The crew protects floors and finishes, completes repairs and sanding, then moves through the project in a logical order.
06.
Final walkthrough & handover
We walk the project with you, handle any touch-ups and leave you with labelled leftover paint and a clear point of contact.
07 · Questions & Answers
Millwork & Fine Finish Painting FAQ
A few common questions before starting an interior painting project.
What is the difference between spray finishing and brush/roll finishing for trim and millwork?
Spray finishing eliminates brush marks and roller texture entirely — the finish is smooth and consistent across the entire surface, just like factory-painted cabinetry. Brush and roll finishing, even done well, leaves some texture that becomes visible in raking light. For high-end trim, built-ins and millwork in luxury custom homes, spray finishing is the correct approach for achieving the premium look the home deserves.
Can you spray finish MDF millwork and trim?
Yes. MDF is one of the most common millwork materials in custom homes and requires specific preparation — proper filling of exposed edges, correct primer for MDF porosity and controlled spray application to avoid grain raising. We have extensive experience spray finishing MDF trim, built-ins, and cabinetry to a factory-smooth result.
Do you work with custom home builders on new construction finishing?
Yes. We work directly with Edmonton custom home builders on new construction fine finish work — integrating into the construction schedule at the appropriate stage, coordinating with other trades, and delivering the level of finish quality that premium custom home builders need to satisfy their clients.
Can you spray finish coffered ceilings and feature beams?
Yes. Coffered ceilings, exposed beams, and architectural ceiling details require specialized spray setup and meticulous masking of adjacent surfaces. We have the equipment, the experience and the patience to finish these feature elements to the standard they deserve — clean lines, consistent sheen and a result that photographs as beautifully as it looks inperson
How do you protect the rest of the home during spray finishing?
Meticulous masking and full site protection. Before any spray work begins, we mask all adjacent walls, floors, fixtures,and surfaces completely. We use professional-grade masking paper and tape, plastic sheeting for large areas, and take every precaution to ensure overspray does not reach any unintended surface. The site is clean and organized throughout every phase of the work
Are you licensed and insured for fine finish painting work in Edmonton?
Yes. City of Edmonton Licensed (Licence #639657327-001), Fully Insured, and WCB Covered. Written workmanship warranty on every project. All documentation available immediately upon request
Share a few details about your custom home, high-end repaint or commercial space and we’ll prepare a tailored proposal. No pressure, no pushy sales – just honest advice on the best way to approach your painting work.
